Steelcraft-automotive 53310 GRILL GUARD Bedienungsanleitung PDF herunterladen

GRILLE GUARD

07-12 TOYOTA TUNDRA / 08-12 SEQUOIA

Page 1 of 5 5/3/12 Rev E (DP)

PARTS LIST:

Grille Guard

3/8" Flat Washers

Driver/Left Frame Mounting Bracket

3/8" Nylon Lock Nuts

Passenger/Right Frame Mounting Bracket

12mm Plastic Washers

Driver/Left Top Top Mounting Bracket

12-1.75mm x 35mm Hex Bolts

Passenger/Right Top Mounting Bracket

12mm Lock Washers

Driver/Left Top Bracket

12mm ID x 32mm OD x 3mm Flat Washers

Passenger/Right Top Bracket

10-1.50mm x 35mm Hex Bolts

10mm Double Bolt Plates

10mm Lock Washers

3/8" Quick Release Bolts

10mm ID x 27mm OD x 3mm Flat Washers

3/8" Plastic Washers

10mm Nylon Lock Nuts

600mm x 50mm x 1.0mm Adhesive Foam Strips

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. NOT

RECOMMENDED FOR VEHICLES WITH OPTIONAL "ACTIVE" LASER GUIDED CRUISE

CONTROL SYSTEMS.

2. WARNING! This Grille Guard is designed to tilt forward by releasing the Quick Release

Bolts on the Top Brackets and loosening the upper bolt on the Mounting Bracket when

the hood needs to be opened for service. Make sure that all hardware is fully tightened

after closing the hood. Read Page 5, "Opening and Closing of Hood," before installing

the Grille Guard.

3. Starting from under the front of the vehicle, remove the (2) factory tow hooks and set aside,

(Figure 1A & 1B).

4. Select the driver/left and passenger/right Frame Mounting Brackets. Refer to the illustration on

Page 1 to identify the Frame Mounting Brackets.

5. Hang the driver/left side Frame Mounting Bracket in position by partially threading the two

factory bolts through the Mounting Bracket and into the frame. NOTE: Depending on model

and year, the vehicle may be equipped with small, (Figure 1A), or large, (Figure 1B), tow

hooks. Only the small tow hook will clear the Frame Mounting Bracket. If desired, install the

small tow hook over the Mounting Bracket using the factory hardware, (Figure 1A). Repeat

this step for the passenger/right side Frame Mounting Bracket installation.

(2) 10mm Double

Bolt Plates

Driver/Left Side Top

Mounting Bracket

Passenger/Right Side Top

Mounting Bracket

Driver/Left side Frame

Mounting Bracket

Passenger/Right side Frame

Mounting Bracket

Installation Complete

3/8 Quick Release Bolts with

(2) 3/8 Flat Washers

(1) 3/8 Nylon Lock Nut

Passenger/Right

Side Top Bracket

Driver/Left Side

Top Bracket

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - PROCEDURE:

GRILLE GUARD 07-12 TOYOTA TUNDRA / 08-12 SEQUOIA Page 1 of 5

Seite 2

GRILLE GUARD 07-12 TOYOTA TUNDRA / 08-12 SEQUOIA Page 2 of 5

Seite 3

GRILLE GUARD 07-12 TOYOTA TUNDRA / 08-12 SEQUOIA Page 3 of 5

Seite 4 - 07-On Sequoia Pictured

GRILLE GUARD 07-12 TOYOTA TUNDRA / 08-12 SEQUOIA Page 4 of 5

Seite 5

GRILLE GUARD 07-12 TOYOTA TUNDRA / 08-12 SEQUOIA Page 5 of 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 53310 GRILL GUARD Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 53310 GRILL GUARD herunter. Steelcraft Automotive 53310 GRILL GUARD User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 53310 GRILL GUARD