Steelcraft-automotive 75090 SPORT BAR Bedienungsanleitung PDF herunterladen

PARTS LIST:

1 Sport Bar 4 12-1.75mm x 35mm Hex Head Bolt

1 Driver Mounting Bracket (A) 6 12mm Nylock Nuts

1 Passenger Mounting Bracket (B) 12 12mm ID x 30mm OD x 3mm

2 12-1.75mm x 60mm Hex Head Bolt Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Using a flat screwdriver carefully remove all fasteners from factory plastic shroud

underneath the vehicle. There are (4) on the front and (3) on each side by the fender

(Figure 1

3. Remove plastic shroud and place it on a working area. Using a hack saw; carefully cut the

driver side marked area shown in Figure 5.

4. Reposition factory plastic shroud with fasteners removed in step 2.

5. From underside of vehicle, locate and remove the passenger and driver factory sub frame

bolts located on the outer side of plastic shroud (Figure 2 & 3).

6. Position Passenger Side Mounting Bracket as shown in Figure 2 and secure it with factory

bolt removed in step 5. Do not tighten at this time.

7. Use the included (1) 12-1.75mm x 60mm Hex Head Bolt, (1) 12mm Nylock Nut, and (2)

12mm Flat Washers to attach the second mounting hole on the bracket to the existing

hole on the sub-frame of the vehicle (Figure 2). Do not tighten at this time.

8. Repeat steps 6-7 for driver side.

9. Mount Sport Bar on the inner side of Mounting Brackets (Figure 4). Use the included (4)

12-1.75mm x 35mm Hex Head Bolts, (4) 12mm Nylock Nuts, and (8) 12mm Flat Washers

to attach Sport Bar to both mounting brackets.

10. Once the Sport Bar is fully mounted on vehicle, level and adjust Sport Bar; then tighten all

hardware at this time.

11.Do periodic inspections to the installation to make sure that all hardware is secure and

tight.

Page 1 of 1

2/22/07 (AM)

INSTALLATION INSTRUCTIONS

SPORT BAR

2007 HONDA CRV

PART NUMBER 750905

Remove these fasteners

There are three more

fasteners by the fender

There are three more

fasteners by the fender

(A)

(B)

1 2 3

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

PARTS LIST:1 Sport Bar 4 12-1.75mm x 35mm Hex Head Bolt1 Driver Mounting Bracket (A) 6 12mm Nylock Nuts1 Passenger Mounting Bracket (B) 12 12mm

Seite 2 - Figure 4

Passenger side with Mounting Bracket Shown Driver side without Mounting Bracket ShownFigure 1Figure 2 Figure 3Figure 4

Seite 3 - Figure 5

Figure 5 Page 1 of 1 2/22/07 (AM)

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 75090 SPORT BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 75090 SPORT BAR herunter. Steelcraft Automotive 75090 SPORT BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 75090 SPORT BAR