Steelcraft-automotive 50350 GRILL GUARD Bedienungsanleitung PDF herunterladen

PARTS LIST:

1 Grille Guard 2 6-1.00mm x 20mm Allen Bolts

1 Passenger Side Mounting Bracket (A) 2 6mm Flat Washers

1 Driver Side Mounting Bracket (B) 2 6mm Lock Washers

1 Passenger Side Top Bracket (C) 6 12-1.75mm x 30mm Hex Head Bolts

1 Driver Side Top Bracket (D) 6 12mm Nylock Nuts

12 12mm Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. From underside of vehicle, remove tow hooks.

3. Once the tow hook has been removed from vehicle, remove the existing plastic trim

around the tow hook (Figure 1). NOTE: You will not be re-installing the plastic trim.

4. Re-insert tow hooks back into place

5. Insert driver side Mounting Bracket the same way you re-inserted the tow hooks, on the

underside and outer side of frame (Figure 2). NOTE: The three holes should be in a

vertical position and Mounting Bracket mounted on the outer side of frame.

6. Attach Driver Side Mounting Bracket and factory tow hook to frame using the factory tow

hook bolts (Figure 2). Do not tighten at this time.

7. Repeat steps 4 & 5 for passenger side.

8. Locate driver side Top Bracket. Attach inner side of Top Bracket to existing bolt holding

the color grille shell (Figure 3). Repeat this step for passenger side.

9. With help position Grille Guard on the inner side of Mounting Brackets. Attach Grille

Guard to Mounting Brackets using the included (6) 12-1.75mm x 30mm Hex Head Bolts,

(6) 12mm Nylock Nuts, and (12) 12mm Flat Washers. Do not tighten at this time.

10. Attach opposite side of Top Brackets to the top bar on the brush guard using the included

(2) 6-1.00mm x 20mm Allen Bolts, (2) 6mm Lock Washers, and (2) 6mm Flat Washers

(Figure 3).

11. Level and adjust Grille Guard as desire; then tighten all hardware at this time.

12.Do periodic inspections to the installation to make sure that all hardware is secure and

tight.

Page 1 of 3

2/8/07 (AM)

INSTALLATION INSTRUCTIONS

GRILLE GUARD

07 SUBURBAN ¾” TON 4x4

PART NUMBER

After you removed

tow hooks from

vehicle, remove &

trim or remove &

leave off this plastic

around tow hook

(A) (B)

1 2 3

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

PARTS LIST:1 Grille Guard 2 6-1.00mm x 20mm Allen Bolts1 Passenger Side Mounting Bracket (A) 2 6mm Flat Washers1 Driver Side Mounting Bracket

Seite 2 - (Driver Side Shown)

Top BracketInstallation Complete(Driver Side Shown) Page 2 of 3 2/8/07 (AM)Figure 1Existing Tow Hook Bolts

Seite 3 - Figure 5 Figure 6

Page 3 of 3 2/8/07 (AM)12mm x 20mm Hex Bolts, 12mm Nylock Nuts, & 12mm Flat WashersFigure 5 Figure 6

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 50350 GRILL GUARD Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 50350 GRILL GUARD herunter. Steelcraft Automotive 50350 GRILL GUARD User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 50350 GRILL GUARD