Steelcraft-automotive 52080 GRILL GUARD Bedienungsanleitung PDF herunterladen

STEEL C RA F T

INSTALLATION INSTRUCTIONS

FRONT BAR PART # 52080

2002-2004 DODGE RAM P/U 1500 2/4 WD

PARTS LIST

(2) FRAME BRACKETS

(12) 7/16 x 1-1/4 HEX BOLTS

(12) 7/16 HEX NYLON LOCK NUTS

(24) 7/16 FLAT WASHERS

INSTALLING FRONT BAR

1) REMOVE FACTORY TOW HOOK FROM FRONT OF VEHICLE TO EXPOSE VEHICLE

BUMPER BRACKET.

NOTE: IF VEHILCE DOES NOT HAVE TOW HOOK, LOCATE AND REMOVE THE (2)

PLASTIC PUSH RIVETS THAT SECURE PLASTIC PANELS ON EITHER SIDE OF FRONT

BUMPER MOUTH ( SEE FIGURE 1 ) REMOVE PLASTIC PANELS TO EXPOSE VEHICLE

BUMPER BRACKETS.

2) ATTACH DRIVER SIDE FRAME BRACKET TO DRIVER SIDE VEHICLE BUMPER

BRACKET USING 7/16 x 1-1/4 HEX BOLTS, 7/16 HEX NYLON LOCK NUTS AND 7/16 FLAT

WASHERS.

3) REPEAT FOR PAASENGER-SIDE OF VEHICLE USING PASSENGER SIDE FRAME

BRACKET.

4) LINE UP THE (3) HOLES ON THE LOWER PORTION OF THE FRONT BAR WITH THE (3)

HOLES ON EACH OF THE FRAME BRACKETS (SEE FIGURE 2 ) AND ATTACH USING 7/16

x 1-1/4 HEX BOLTS, 7/16 HEX NYLON LOCK NUTS AND 7/16 FLAT WASHERS. HAND

TIGHTEN.

5) ALIGN THE LEFT AND RIGHT SIDE OF THE FRONT BAR TO THE VEHICLE BUMPER,

ONCE SATISFIED THAT THE BAR IS ALIGN, TIGHTEN ALL FASTENERS SUPPORTING

THE FRAMR BRACKETS AND FRONT BAR.

CUSTOMER SERVICE TOLL FREE (888) 261-4537

STEEL C RA F TINSTALLATION INSTRUCTIONSFRONT BAR PART # 520802002-2004 DODGE RAM P/U 1500 2/4 WDPARTS LIST (2) FRAME BRACKETS(12) 7/16 x 1-1/4 HEX BO

Keine Kommentare

Steelcraft-automotive 52080 GRILL GUARD Bedienungsanleitung