Steelcraft-automotive 78020 SPORT BAR Bedienungsanleitung PDF herunterladen

SPORT BAR

2011 KIA SORENTO

Page 1 of 4 8/24/10 (DP)

Complete Installation

PARTS LIST:

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS

RECOMMENDED. CUTTING IS REQUIRED.

2. Starting under the front of the vehicle, remove the plastic fasteners and hex bolts from the

center splash guard, (Figure 1). NOTE: Pay close attention to the type of clip and location for

easier reinstallation. The center splash guard will need to be cut to clear the Mounting

Brackets and removal is recommended. Note that the center splash guard has (2) fasteners

behind the bumper cover, (one per side), that are difficult to remove, (Figure 1).

3. Once the center splash guard is removed, also remove the (2) fasteners holding each plastic

cover located on the driver and passenger side, (Figure 2). It is not necessary to remove the

(2) plastic covers, only remove the clips.

4. Select the driver side Mounting Bracket and hold it in position by inserting (1) 10mm x 80mm

Hex Bolt with (1) 10mm x 20mm Flat Washer up through the outer hole in the Bracket and up

through the body mount, (Figure 3). Secure with (1) 10mm x 27mm Large Flat Washer, (1)

10mm Lock Washer and (1) 10mm Hex Nut, (Figure 4). NOTE: Carefully pull the plastic

corner cover out of the way to access the top of the body mount.

5. Next, select the driver side Support Bracket and hold it in place over the inner hole in the

Bracket and body mount. Insert (1) 10mm x 80mm Hex Bolt with (1) 10mm x 20mm Flat

Washer through the inner hole in the Bracket and up through the body mount and finally the

Support Bracket. Secure with (1) 10mm x 27mm Large Flat Washer, (1) 10mm Lock Washer

Sport Bar

12mm Lock Washers

Driver/Left Frame Bracket

12mm Hex Nuts

Passenger/Right Frame Bracket

10-1.5mm x 80mm Hex Bolts

Driver/Left Support Bracket

10mm x 20mm OD x 2.5mm Flat Washers

Passenger/Right Support Bracket

10mm x 27mm OD x 3mm Flat Washers

12-1.75mm x 35mm Hex Bolts

10mm Lock Washers

12-1.75mm x 40mm Hex Bolts

10mm Hex Nuts

12mm x 32mm OD x 3mm Flat Washers

Driver/Left Side

Mounting Bracket

Driver/Left

Side Support

Bracket

Passenger/Right Side

Mounting Bracket

Passenger/

Right Side

Support

Bracket

1 2 3 4

SPORT BAR 1
2011 KIA SORENTO 1

Inhaltsverzeichnis

Seite 1 - 2011 KIA SORENTO

SPORT BAR 2011 KIA SORENTO Page 1 of 4 8/24/10 (DP) Complete Installation PARTS LIST:

Seite 2

SPORT BAR 2011 KIA SORENTO Page 2 of 4 8/24/10 (DP) and (1) 10mm Hex Nut, (Figure 5A & 5B). Snug but do not

Seite 3

SPORT BAR 2011 KIA SORENTO Page 3 of 4 8/24/10 (DP) Driver Side Installation Pictured

Seite 4

SPORT BAR 2011 KIA SORENTO Page 4 of 4 8/24/10 (DP) 12mm x 35mm Hex Bolt (2) 12mm Flat Washers

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 78020 SPORT BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 78020 SPORT BAR herunter. Steelcraft Automotive 78020 SPORT BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 78020 SPORT BAR