Steelcraft-automotive 71320 BULL BAR Bedienungsanleitung PDF herunterladen

PARTS LIST:

1 Bull Bar

1 Driver/Left side Mounting Bracket

1 Passenger/Right Mounting Bracket

4 3/8” x 1 ¼” Hex Head Bolts

4 3/8” Nylock Nuts

8 3/8” Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. NOTE: It may be necessary to remove/relocate front license plate and license plate

bracket. It is not required, but strongly recommended. If local/state law requires a license

plate, license plate relocation kit is available.

3. From front of vehicle remove the driver side bumper mount bolts (Figure 2).

WARNING! Do not remove passenger and driver bumper mount bolts at the same time.

Remove one side at a time.

4. Place Mounting Bracket onto vehicle and line it up against the outer gusset bend on the

frame. Leave about 1/8” clearance between bottom of Mounting Bracket and bumper.

Secure Mounting Bracket to vehicle using the factory bolts (Figure 3). Fully tighten these

bolts at this time.

5. Once the driver side Mounting Bracket is fully tightened, repeat steps 2 - 4 for passenger

side Mounting Bracket.

6. With help position Bull Bar on the outer side of Mounting Brackets. Attach Bull Bar to

Mounting Brackets using the included (4) 3/8” x 1 ¼” Hex Head Bolts, (4) 3/8” Nylock

Nuts, and (8) 3/8” Flat Washers (Figure 4). Do not tighten at this time.

7. Level and adjust Bull Bar as desired, then tighten all hardware at this time.

8. Do periodic inspections to the installation to make sure that all hardware is secure and

tight..

Page 1 of 3 3/16/07

(AM)

INSTALLATION INSTRUCTIONS

BULL BAR

08 FORD SUPER DUTY F250/F350

PART NUMBER

Driver Side

Mounting Bracket

Passenger Side

Mounting Bracket

1 2 3

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

PARTS LIST:1 Bull Bar1 Driver/Left side Mounting Bracket1 Passenger/Right Mounting Bracket4 3/8” x 1 ¼” Hex Head Bolts4 3/8” Nylock Nuts8 3/8”

Seite 2 - Figure 1

Installation Complete Page 2 of 3 3/16/07 (AM)Factory BoltsDriver side Mounting BracketRemove these fact

Seite 3 - Figure 5

Page 3 of 3 3/16/07 (AM)Figure 5

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 71320 BULL BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 71320 BULL BAR herunter. Steelcraft Automotive 71320 BULL BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 71320 BULL BAR