Steelcraft-automotive 72170 SPORT BAR Bedienungsanleitung PDF herunterladen

2.5” SPORT BAR

02-11 JEEP LIBERTY/ 07-11 DODGE NITRO

Page 1 of 2 2/12/07 (AM)

PARTS LIST:

Sport Bar

12-1.75mm x 30mm Hex Head Bolts

Passenger Side Mounting Bracket (D)

12mm Nylock Nuts

Driver Side Mounting Bracket (A)

12mm Lock Washers

Passenger Side Double Nut Plate (C)

12-1.75mm x 35mm Hex Head Bolts

Driver Side Double Nut Plate (B)

12mm ID x 37mm OD x3mm Flat

Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION.

2. From underside of vehicle, remove the passenger and driver side rubber shroud located by the bumper

air inlet (Figure 1).

3. Through bumper air inlet, insert passenger side Double Nut Plate through existing hole on the radiator

support (Figure 2). NOTE: Use the larger round hole on the radiator support to insert Double Nut Plate.

4. Center holes on the Double Nut Plate with holes on the radiator support.

5. Hang passenger side Mounting Bracket into position by partially treading (1) 12-1.50mm x 35mm Hex

Head Bolt, (1) 12mm Flat Washer, and (1) 12mm Lock Washer on the inner side of the Mounting

Bracket and trough already inserted Double Nut Plate (Figure 3). From underside of vehicle proceed to

install another Bolt with Washer and Lock Washer on the outer side of the Mounting Bracket and trough

Double Nut Plate. Do not tighten at this time.

6. Repeat steps 3-5 for driver side.

7. Position Bull Bar on the outer side of Mounting Brackets. Install Bull Bar onto Mounting Brackets using

the included (4) 12-1.75mm x 30mm Hex Head Bolts, (4) 12mm Nylock Nuts, and (8) 12mm Flat

Washers (Figure 4). Do not tighten at this time.

8. Level and adjust Bull Bar as desired; then tighten all hardware at this time.

9. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

Figure 1

Remove this

plastic shroud

Bottom side

of radiator

(A)

(D)

(B)

(C)

1 2

Inhaltsverzeichnis

Seite 1

2.5” SPORT BAR 02-11 JEEP LIBERTY/ 07-11 DODGE NITRO Page 1 of 2 2/12/07 (AM) PARTS LIST: 1 Spor

Seite 2 - Figure 5

2.5” SPORT BAR 02-11 JEEP LIBERTY/ 07-11 DODGE NITRO Page 2 of 2 2/12/07 (AM) Passenger Side Shown Passe

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 72170 SPORT BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 72170 SPORT BAR herunter. Steelcraft Automotive 72170 SPORT BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 72170 SPORT BAR