Steelcraft-automotive 402220p 4 PREMIUM OVAL SIDE BAR Bedienungsanleitung PDF herunterladen

Page 1 of 3 2/15/10 Rev1 (DP)

PARTS LIST:

Driver/Left Side Bar

1/2” x 2” Hex Bolts

Passenger/Right Side Bar

1/2” Lock Washers

Driver Side/Left Front Mounting Bracket

1/2” ID x 1-1/2" OD x 1/8" Flat Washers

Passenger Side/Right Front Mounting Bracket

10-1.50mm x 25mm Hex Bolts

Center Mounting Brackets

10mm Lock Washers

Driver Side/Left Rear Mounting Bracket

10mm ID x 20mm OD x 2mm Flat Washers

Passenger Side/Right Rear Mounting Bracket

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. From underside of vehicle, remove the driver side front body mount bolt, steel washer (if

equipped), and rubber bushing, (Figure 1).

3. Select the driver side front Mounting Bracket. Insert the factory body mount bolt through the

Mounting Bracket and into the steel washer, (if equipped), and rubber bushing. Hang the

Mounting Bracket in position by partially threading the factory body mount bolt up into place,

(Figure 2). Repeat this step for the Center Mounting Bracket, (Figure 3), and the Rear

Mounting Bracket, (Figure 4). Snug but do not tighten hardware at this time.

VERY IMPORTANT! There are several different designs, (depending on model year),

for the factory steel body mount bracket, (Figure 1). If necessary, the Front and Rear

Mounting Brackets can be switched, driver side to passenger side, to provide additional

clearance between the gusset on the Mounting Bracket and the factory steel body

mount bracket welded to the frame. To prevent unnecessary noise, adjust the

position of all Mounting Brackets so that once tightened, the Mounting Brackets

do not come in contact with the factory steel body mount bracket.

4. With help position the Side Bar onto the Mounting Brackets. Attach front and rear Mounting

Brackets to Side Bar using the included (2) 1/2” x 2” Hex Head Bolts, (2) 1/2” Flat Washers

and (2) 1/2” Lock Washers, (Figure 2 & 4). Do not tighten at this time.

INSTALLATION INSTRUCTIONS

4" OVAL SIDE BARS WITH BENT ENDS

2002-2010 SILVERADO/SIERRA CREW CAB 1500HD

2004-2005 SILVERADO/SIERRA CREW CAB 1500LD

2001-2010 SILVERADO/SIERRA CREW CAB 2500HD-3500

Driver side

rear

Mounting

Bracket

Driver side front

Mounting Bracket

(2) Center Mounting

Brackets

Passenger side front

Mounting Bracket

Passenger

side rear

Mounting

Bracket

Complete Installation

1 2 3

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Page 1 of 3 2/15/10 Rev1 (DP) PARTS LIST: 1 Driver/Left Side Bar 4 1/2” x 2” Hex Bolts 1 Passenger/Right Side Bar 4 1/2” Lock Washers 1

Seite 2

Page 2 of 3 2/15/10 Rev1 (DP) 5. Attach center Mounting Bracket to Side Bar using the included (1) 10-1.50mm x 25mm Hex Head Bolt, (1) 10mm Flat Was

Seite 3

Page 3 of 3 2/15/10 Rev1 (DP) IMPORTANT ALERT: GM uses a very strong thread-locking compound on all body bolts. Use of an air assisted impact ratche

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 402220p 4 PREMIUM OVAL SIDE BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 402220p 4 PREMIUM OVAL SIDE BAR herunter. Steelcraft Automotive 402220p 4 PREMIUM OVAL SIDE BAR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 402220p 4 PREMIUM OVAL SIDE BAR