Steelcraft-automotive 413809 5 OVAL SIDE BAR Bedienungsanleitung PDF herunterladen

5IN STRAIGHT OVAL SIDEBAR

09-11 FORD F-150 SUPER CREW CAB

Page 1 of 3 8/16/10 (DP)

PARTS LIST:

Qty

Description

Qty

Description

Driver/Left Side Bar

10mm Clip Nuts

Passenger/Right Side Bar

10-1.50mm x 30mm Hex Bolts

Driver/Left Front Mounting Bracket

10mm Lock Washers

Passenger/Right Front Mounting Bracket

10mm x 30mm OD x 2.5mm Flat Washers

Driver/Left Center Mounting Bracket

8-1.25mm x 25mm Hex Bolts

Passenger/Right Center Mounting Bracket

8mm x 24mm OD x 2mm Flat Washers

Driver/Left Rear Mounting Bracket

8mm Lock Washers

Passenger/Right Rear Mounting Bracket

8mm Hex Nuts

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. DRILLING IS

REQUIRED.

2. Starting on the driver side of the vehicle, locate the factory mounting holes in the side panel,

(Figure 1). NOTE: These holes may be covered with sealing tape. Slide the 10mm Clip Nuts

into the opening and line up the threaded nut on the clip with the round holes, (Figure 1).

3. Partially attach the driver side Mounting Bracket to the Clip Nuts with the included (2) 10mm x

30mm Hex Bolts, (2) 10mm Lock Washers and (2) 10mm Flat Washers, (Figure 2). Do not

tighten hardware at this time. NOTE: The Cradle on the Front Mounting Bracket should face to

the rear of the vehicle.

4. Align the bottom holes in the front Mounting Bracket with the (2) holes in the pinch weld and

attach using the included (2) 8mm x 25mm Hex Bolts, (2) 8mm Lock Washers, (4) 8mm Flat

Washers and (2) 8mm Hex Nuts, (Figure 3). NOTE: Insert the bolts up from the bottom of the

pinch weld.

5. Repeat Steps 2 – 4 for Rear Mounting Bracket installation. NOTE: The cradle on the Rear

Mounting Bracket should face the front of the vehicle, (Figure 4).

6. Select the driver side Center Mounting Bracket. Locate the mounting location and insert only

(1) 10mm Nut Clip as per Step 2, (Figure 5). Secure the Center Bracket to the Clip Nut with

(1) 10mm x 30mm Hex Bolt, (1) 10mm Lock Washer and (1) 10mm Flat Washer, (Figure 6).

Line up the (1) bottom hole with the hole in the pinch weld and bolt together with (1) 8mm x

25mm Hex Bolt, (1) 8mm Lock Washer, (2) 8mm Flat Washers and (1) 8mm Hex Nut, (Figure

Driver Side

Rear

Mounting

Bracket

Driver Side

Center Mounting

Bracket

Driver Side Front

Mounting Bracket

Passenger Side

Rear Mounting

Bracket

Passenger Side

Center Mounting

Bracket

Passenger Side Front

Mounting Bracket

Note step pad location

to determine front of

Sidebar

1 2 3

PARTS LIST: 1

Inhaltsverzeichnis

Seite 1 - PARTS LIST:

5IN STRAIGHT OVAL SIDEBAR 09-11 FORD F-150 SUPER CREW CAB Page 1 of 3 8/16/10 (DP) PARTS LI

Seite 2

5IN STRAIGHT OVAL SIDEBAR 09-11 FORD F-150 SUPER CREW CAB Page 2 of 3 8/16/10 (DP) 6). Do not tigh

Seite 3

5IN STRAIGHT OVAL SIDEBAR 09-11 FORD F-150 SUPER CREW CAB Page 3 of 3 8/16/10 (DP) Driver Side Ins

Kommentare zu diesen Handbüchern

Keine Kommentare

Steelcraft-automotive 413809 5 OVAL SIDE BAR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Steelcraft-automotive 413809 5 OVAL SIDE BAR herunter. Steelcraft Automotive 413809 5 OVAL SIDE BAR User Manual [es] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Steelcraft-automotive 413809 5 OVAL SIDE BAR